450 50

What are the scope of the wire brush?

Time: 2024-05-18
Author: Nothing
Origin: Nothing

Steel wire brush, especially steel wire brush rollers, is usually used in steel or aluminum surface treatment plants. It is installed by a series of stainless steel wire brush rollers on a full -automatic high -speed bristle polishing machine (brushing machine). The wire brush roller is rotated from the upper and lower surface of the plate strap in the direction of the rolling motion in the opposite direction. The brushed iron oxide skin was washed away with a closed circulating cooling water washing system. The thickness of the general roll wire is 1.09-6.35mm, and the update cycle of the steel wire brush is updated every 20,000 T thin plates or 40,000 T steel rolls.

The stainless steel ultra -fine elastic steel wire brush is dedicated to cleaning ceramic mesh rollers. This is because the hardness of the ceramic is much greater than the hardness of the wire. The wire brush does not damage the mesh roller surface ceramic layer. Ultra -fine elastic copper wire brushes are commonly used for cleaning chrome -plated metal mesh rollers and concave print rollers. It is better to use the cleaning agent.

Common specifications 6*14 or 5*14 holes, and the steel wire material 304 stainless steel wire or ordinary steel wire is available. Each hole is usually folded into 5 roots, and the wire is about 20mm. The brush made of ordinary steel wire is easy to rust and is not used. It is too different from the quality of wooden handle wire brushes made of 304 stainless steel wire.

Steel wire pipe brush is generally used in industrial pipelines. The mechanical threading is cleaned up rust removal, and the polishing and cleaning effect. The pipe brush process uses steel wire or stainless steel wire sandwicked in the middle of two iron wires or four iron wires.